LCR Meter Instrument Driver Readme

To rate this instrument driver, go to the driver download page on the Instrument Driver Network.

1. Overview

Instrument Driver Technology:

LabVIEW Plug and Play (project-style)

Manufacturer:

GWInstek

Supported Language(s):

LabVIEW

Supported Model(s):

LCR-6000 Series

Model(s) Tested:

LCR-6300

Interface(s):

SERIAL

Firmware Revision(s) Tested:

V7.03 (Support to V7.03 or later)

Certified:

No

NI Supported:

No

Source Code Available:

Yes

Driver Revision:

1.01

Original Release Date:

05/31/2016

Current Revision Date:

11/28/2018

2. Required Software

Some software components need to be installed before using this instrument driver. The minimum versions of these components are listed below, and can be downloaded from the Download Site.

VISA 3.0 or later

For LabVIEW 8.2 and LabVIEW 2009 Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»Search the LabVIEW Help.

For LabVIEW 2010 or later Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»LabVIEW Help.

3. Known Issues

To report issues or provide feedback about this instrument driver, please send an email to instrument.drivers@ni.com.

4. Revision History

The latest version of this and other LabVIEW and LabWindows/CVI instrument drivers can be downloaded at the Instrument Driver Network.

REV 1.0, 05/31/2016
Modified by: Lionel Chen
Original release.

REV 1.01, 11/28/2018
Modified by: Lionel Chen
Fixed an issue where DCR could not be executed correctly in LCR Meter Acquire Single.vi.